No mess, no waste, no cleanup

No need to haul out the separate cans of resin and hardener, mixing cups, stir sticks and fillers. A Thixo cartridge, mixing tip, and a caulk gun are all you need to lay down a neat, uniform, pre-mixed bead of strong, waterproof, thickened epoxy adhesive in less time and with greater accuracy.

The resin and hardener sit in separate chambers inside the cartridge. Squeeze the trigger and the resin and hardener slide into the static mixing tip where they’re blended together in a perfect 2:1 mix so Thixo comes out of the tube ready to go. Squeeze out just what you need, exactly where you need it. Use just what you need and save the rest – nothing gets wasted.

And there’s really no cleanup. Just leave the mixing tip attached and let it cure. When you’re ready to use it again, just change out the old mixing tip for a new one. For longer term storage, remove the mixing tip and toss it, then replace the Thixo cap. It’s also much easier to store onboard – or anywhere else, for that matter.

If you have a really big installation, try Thixo PRO. It’s our original Thixo formula packaged to provide 2½ times more epoxy adhesive. You’ll save money, but you’ll also save time not having to change out cartridges as often. Thixo and PRO can be used for many of the jobs you would normally use a 5:1 epoxy resin for, and they are compatible with our TotalBoat 5:1 Epoxy Resin.

Thick enough not to sag or drip, but thins enough to wet out

Thixo has excellent adhesion and its unique viscosity makes it versatile to use for projects ranging from overhead bonding and gap-filling jobs to filleting and small fiberglass boat repairs and tabbing. It’s especially easy to squirt into hard-to-reach places, too. Once Thixo cures, you can sand, paint, saw, machine, drill, tap, or file it.

Long working time, short setup time, and a permanent, flexible, waterproof result — every time

Epoxy forces you to work against the clock. At 77°F, Thixo gives you a generous 50 minutes of working time in which it remains workable inside the static mixing tip. The short 30-35 minute gel time means that once you apply it, it sets up faster so you can move on to something else. Because of the pre-blended 2:1 mix, the results are always the same – strong and resilient. Whatever you’re sealing stays sealed, whatever you’re filling stays filled, and whatever you’re gluing stays stuck.

Get two static mixing tips and more epoxy adhesive for your money

Our Thixo cartridge costs less than other 2:1 epoxy adhesives, and comes with two static mixing tips instead of just one. These unique tips do the mixing for you, and lay down a uniform 1/8" bead. If you want a larger bead, the tip has trimmable grooves to increase bead diameter. Be sure to keep a few tips on hand so you’ll have one when you need it. They’re inexpensive, and we have them in packs of 2, 12, and 60.

The good news about the mixing tips is that you don’t need them for smaller jobs. You can just squeeze out what you need into a cup and mix it with a stir stick. Remember, the more thoroughly you mix epoxy, the better it will cure.

Thixo 2:1 Adhesive Details

• Work neatly and efficiently when gluing, bonding, filleting, tabbing, and filling gaps.
• Bonds strongly to wood, fiberglass, and properly prepared metals, aluminum, fiberglass, block, brick, concrete, glass, slate, tile, stone, and more.
• For use above and below the waterline.
• Cured epoxy can be drilled, sanded and painted, and is 100% waterproof.
• Does not sag on vertical or overhead surfaces, and pulls nicely into fillets.
• Provides ample working time for longer installations.
• Sets up quickly so you can move on to other projects.
• Smoother to apply – not as gritty as other 2:1 epoxy adhesives.
• Use as much as you need, and save the rest for the next project.
• Easy to store onboard, and has a long shelf life.
• Thixo epoxy cartridges fit all standard caulk guns.
• Each cartridge comes with two static mixing tips that automatically blend the 2:1 resin to hardener mix, with no mess or guessing.
• Size: Available in an individual 185 ml cartridge (with 2 static mixing tips), or in a package of six cartridges (with 12 static mixing tips).
• Extra mixing tips are sold separately.

A Thixo for every job, no matter what you need to bond, fill, fillet, or glue

Not all epoxies work the same. We’ve expanded the Thixo range to suit different applications. Each one is available as one cartridge with 2 static mixing tips, or in a package of 6 cartridges with 12 static mixing tips. Whether you’re a professional or DIYer, our innovative 2:1 epoxy system will provide great results, at a great price.